VMware View Manager 4.5 Installation Manual page 42

VMware View Installation Guide
Prepare your environment for the installation. See
n
Server," on page 37.
Familiarize yourself with the incoming TCP ports that must be opened on the Windows Firewall for View
n
Connection Server instances. See
Procedure
1 Download the View Connection Server installer file from the VMware product page at
http://www.vmware.com/products/
The installer filename is
viewconnectionserver-x86_64-4.5.
2 To start the View Connection Server installation program, double-click the installer file.
3 Accept the VMware license terms.
4 Accept or change the destination folder.
5 Select the View Replica Server installation option.
6 Enter the host name or IP address of the existing View Connection Server instance you are replicating.
7 Accept the Microsoft Software Supplemental License Agreement for Microsoft Active Directory
Application Mode (ADAM).
8 If you install View Connection Server on Windows Server 2008, choose how to configure the Windows
Firewall service.
Option
Configure Windows Firewall
automatically
Do not configure Windows Firewall
If you install View Connection Server on Windows Server 2003, you must configure the required Windows
firewall rules manually.
9 Complete the installation wizard to finish installing the replicated instance.
The VMware View services are installed on the Windows Server computer:
VMware View Connection Server
n
VMware View Framework Component
n
VMware View Message Bus Component
n
VMware View Script Host
n
VMware View Security Gateway Component
n
VMware View Web Component
n
VMware VDMDS, which provides View LDAP directory services
n
For information about these services, see the VMware View Administrator's Guide.
What to do next
You do not have to perform initial configuration on a replicated instance of View Connection Server. The
replicated instance inherits its configuration from the existing View Connection Server instance.
If you are reinstalling View Connection Server on a Windows Server 2008 operating system and you have a
data collector set configured to monitor performance data, stop the data collector set and start it again.
Repeat this procedure to install additional replicated instances.
42
"Firewall Rules for View Connection Server,"
to the Windows Server computer.
VMware-viewconnectionserver-4.5.
, where xxxxxx is the build number.
x - xxxxxx .exe
Action
Let the installer configure Windows Firewall to allow the required incoming
TCP protocol connections.
Configure the Windows firewall rules manually.
"Installation Prerequisites for View Connection
or
x - xxxxxx .exe
on page 41.
VMware-
VMware, Inc.