Deploying Detail Discovery; Detail Discovery Configuration; How Do Active Probe Configurations Affect Detail Discovery Policies; Detail Discovery Policies - VMware VCENTER APPLICATION DISCOVERY MANAGER 6.1.1 User Manual

ADM User's Guide
Troubleshooting Knowledgebase
Navigate to Detail Discovery > Troubleshooting Knowledgebase page for troubleshooting scenarios. The
following is an example in which you would use this tab:
1 You encounter detail discovery problems or errors.
2 Your Customer Support Representative cannot resolve the problem. Engineering requires more
information and creates a specialized knowledge base file in order to debug the problem.
3 You upload the file from the Detail Discovery > Troubleshooting Knowledgebase page.
N Troubleshooting knowledge base applies only to create a detail discovery support package until the file
OTE
is removed. It does not customize the detail discovery knowledge base permanently.

Deploying Detail Discovery

This section describes how to deploy Detail Discovery.

Detail Discovery Configuration

ADM has an extensive detail discovery feature that enhances and complements the results obtained through
Passive Discovery. Detail Discovery is performed by communication between hosts in a managed network,
using four common network protocols: SNMP, SSH, Telnet, and WMI. Detail discovery is also performed using
the discovery protocol VI‐SDK, which is a VMware proprietary API used to query model of VMware, control
the behavior of virtual infrastructure, and receive notifications on changes in the virtual environment.
Using these protocols, supplementary information about network hosts is obtained and added to the
Configuration Management Database (CMDB). To maximize security and minimize the risk of impact on the
managed network, the administrative user of the ADM Console can tightly control the setup and scheduling
of the Detail Discovery queries to the various network hosts.

How Do Active Probe Configurations Affect Detail Discovery Policies?

For Detail Discovery to be successful in a Distributed setup, the hosts to be discovered, needs to be included
in both a Detail Discovery policy and an Active Probe configuration. The Detail Discovery policy includes a
list of items to include in the Detail Discovery, while the Active Probe configuration assigns the specific hosts
on which each Collector can perform Detail Discovery.
Detail Discovery is not be performed on a host that is included in a Detail Discovery policy if it is not included
in an Active Probe configuration. However, the host is still recognized through Passive Discovery and will
appear as Orphaned in the Detail Discovery dashboard because the Active Probe configuration has no
correlation with Passive Discovery.

Detail Discovery Policies

Detail Discovery is controlled and configured through user‐defined Detail Discovery policies. There can be
many policies, each describing a query that is running periodically and collecting network information. For
each policy, the following parameters are defined:

The discovery scope, that is, the set of network hosts that is queried for information.

Scheduling information: How often to access the network hosts covered by the policy. The scheduling
scheme lets ADM users control and balance two conflicting factors. The two conflicting factors are, the
need to have the most updated picture and the need to avoid overloading the network with too many
Detail Discovery queries.

Discovery plan: A discovery plan allows you to define exactly what will be discovered, and therefore
improve performance. You can create passive or Detail Discovery plans that can include or exclude the
discovery of specific hosts, services, and connections.
36 VMware, Inc.