VMware CLOUD DIRECTOR 1.0 Manual page 55

8 In the NAT tab, select a NAT type.
IP Translation
n
Port Forwarding
n
9 Click OK.
Reset Your vApp Network
After you configure your network services, you can reset your network service with new settings. Network
services are not available during the reset.
You are an organization administrator.
Procedure
1 Click My Cloud.
2 In the left pane, click vApps.
3 Select a vApp, right-click, and select Open.
4 On the Networking tab, select a vApp network, right-click, and select Reset Network.
5 Click Yes.
Delete a vApp Network
If you no longer need a network in your vApp, you can delete the network.
You are an organization administrator.
Prerequisites
The vApp should be stopped.
Procedure
1 Click My Cloud.
2 In the left pane, select vApps.
3 Select a vApp, right-click, and select Open.
4 On the Networking tab, select the Show networking details check box.
5 Select a network from the list and select Delete.
You do not receive a confirmation of the deletion, but the vApp network does not appear in the list.
Modify Network Properties
You can modify the properties of your vApp or organization networks.
You are an organization administrator.
Procedure
1 Select Administration.
2 Select Cloud Resources > Networks.
3 Select a network, right-click, and select Properties.
You can modify the name, description, and network specifications for both networks.
4 Modify the relevant properties and click OK.
VMware, Inc.
Chapter 8 Working with vApps
55