Specify System Settings; Ready To Log In - VMware CLOUD DIRECTOR 1.0 Configuration Manual

Specify System Settings

Specify the system settings that control how this Cloud Director installation interacts with vSphere and vShield
Manager.
During the configuration process, the wizard creates a folder in vCenter for Cloud Director to use and specifies
an installation ID for the supporting vShield Manager to use when creating MAC addresses for virtual NICs.
Procedure
1 Enter a name for this Cloud Director installation vCenter folder in the System name field.
2 (Optional) If more than one installation of vShield Manager is connected to this network, select a unique
installation ID for the vShield Manager configured to work with this Cloud Director installation using the
Installation ID control.
3 Click Next to save your choices and go to the next page.

Ready to Log In

After you provide all of the information that the installation wizard requires, you can confirm your settings
and complete the wizard. After the wizard finishes, the login screen of the Cloud Director Web Console
appears.
The Ready to Log In page lists all the settings you have provided to the wizard. Review the settings carefully.
Prerequisites
The Cloud Director Web Console requires access to the installations of vCenter and vShield Manager that you
want to configure as part of this Cloud Director. These installations should be running and configured to work
with each other before you finish this task. For more information, see
Requirements," on page 10.
Procedure
To change a setting, click Back until you get to the page where the setting originated.
n
To confirm all settings and complete the configuration process, click Finish.
n
When you click Finish, the wizard applies the setting information you provided, then starts the Cloud Director
Web Console and displays its login screen.
What to do next
Log in to the Cloud Director Web Console using the user name and password you provided when setting up
the system administrator account. After you have logged in, the console displays a set of Quickstart steps that
you must complete before this Cloud can be used. When the steps are complete, the Guided Tasks are enabled,
and this Cloud is ready for use.
VMware, Inc.
Chapter 3 Cloud Director Setup
"Cloud Director Hardware and Software
31