Table of Contents
Advertisement
10 Route Navigation Menu
While navigating or simulating a route tapping
the
button will take you to the Route
Navigation Menu. From here you can obtain
detailed information about the route you have
calculated or make changes to the settings
without having to exit navigation.
10.1 Route Plan
This takes you back to the Route Plan Menu
(see page 35). From here you can add/remove waypoints, change the Route Options or
even simulate the route. Tapping
your current position. Any changes will be taken in to consideration when calculating the
route.
10.2 Detour
This option allows you to navigate around any
traffic jams or blocked roads which are along
your planned journey. When tapped the
screen will change to show the available
distance options. You will need to estimate the
distance to the blocked road/traffic jam then
choose the option which is the next lowest
distance.
The unit will than calculate a detour route, this
new route can be viewed on the map as a blue line.
Menu screen (see page 37).
10.3 Cancel Route
Tap this option to cancel the route you have planned and stop navigating, you will be
returned to the Free Navi Menu screen.
10.4 Go To
Tapping this option will automatically cancel the route and take you to the Search menu
(see page 19). Were you will be able to enter a new destination to navigate too.
will result in the route being recalculated from
Tap
to confirm the new route the unit will
return to the navigation screen but will now
direct you via the detour route.
Tap
to return to the detour screen, if you
were not happy with the new route and would
like to select a different option or if you no
longer want to add a detour. Tap again from the
Detour screen to go back to the Route Navi
NAVIGATION
Advertisement
Table of Contents
