Table of Contents
Advertisement
Once set tap
return to the settings screen without saving.
8.11 Brightness
Allows you to change the brightness of the screen so
as to optimise it for differently lit environments.
Tapping will change the screen to the brightness
setting screen.
There are 5 settings available and are shown as bars,
with an arrow indicating the currently selected level.
Use the
and
the brightness will be reflected in the screen as the
change is made.
Once set tap
return to the settings screen without saving.
8.12 Calibration
This option allows you to calibrate the screen so that it responds accurately to your screen
taps. You will need this function only if the unit begins to respond inconsistently to your
screen taps.
When tapped you will be shown a warning screen, tap
calibrate the screen. The screen will change to the calibration screen; follow the onscreen
instructions in order to complete the calibration process.
9 Route Plan
Once you have entered your destination and
confirmed it is correct, you will be taken to the Route
Plan screen; from here you can begin navigating,
carry out a simulation of the route or add additional
waypoints to the journey.
Tap
to return to the Free Navigation Menu
screen.
Select a destination so that it is highlighted orange
and tap
to view the location on the map.
9.1 Navigating
To begin navigating to you entered destination tap
route from your current location to your destination. Once calculated the screen will change
to the route navigation screen and you are ready to drive.
to confirm the selection and return to the settings screen. Tap
keys to set the required level,
to confirm the selection and return to the settings screen. Tap
. The unit will begin to calculate a
34
NAVIGATION
to confirm you would like to
to
to
Advertisement
Table of Contents
