Table of Contents
Advertisement
Tap in the white boxes next to either Lon or Lat, then use the keyboard to enter the co-
ordinates you wish to navigate to.
Tap
to change between Degrees:minutes:seconds and Decimal formats.
Tap
to delete any incorrect characters.
Tap
to go back to the Search Menu screen.
Tap
to confirm the entered co-ordinates. The screen will then change to show the
Route Plan screen (see page 34).
6.7 To Navigate Directly Home
Tapping Go Home will directly navigate you to your
set home address without having to tap any other
keys or enter an address. This is very useful as your
home address will be the destination which is
navigated to the most. The screen will change to
show the Route Plan screen (see page 32).
In order to use this option you will need to set your
home address first. If you select this option without
setting your home address first, the unit will ask you if
you wish to set it now. Alternatively this can be done using the Set Home Address found in
the Settings menu (see page 28).
7 Map Options
Allows you to set the map preferences to your liking,
it allows you to set the way the map looks and
behaves during navigation. When tapped the screen
will change to the Map Options screen, from where
you can easily select several options.
7.1 North Up/Heading Up
Changing this option changes the way the map is
orientated when you are navigating.
North Up – Means that the map will be fixed so that
When entering in Degrees:minutes:seconds format. For
Longitude the letters E and W are used to describe the
hemisphere, for Latitude the letters N and S are used to
indicate the hemisphere. ° is used to indicate the
degrees and ' is used to indicate the minutes.
When entering in Decimal format. The N, S, W and E
keys are replaced with + and -, where North and East
are + and South and West are -. Use the . key to enter a
decimal point.
26
NAVIGATION
Advertisement
Table of Contents
