Multi-Trim Video - Ulead DVD MOVIEFACTORY 6 PLUS User Manual

Multi-trim Video

Multi-trim Video lets you select multiple segments from a video and extract these
segments to the Media Clip list.
Note: Multi-trim Video cannot be applied to video clips previously edited using Edit
Room.
To use Multi-trim Video:
1. Select the video to be trimmed in the Media Clip list.
2. Click to open the Multi-trim Video dialog box.
3. Drag the Jog Slider to locate the start of the segment to retain, and then click
or press [F3].
4. Drag the Jog Slider to locate the end of the segment to retain, and then click
or press [F4]. The extracted segment will be added to the Media Clip list.
Tip: To move the Jog Slider at a fixed interval, use
search interval in Duration.
5. To select more segments, repeat steps 3 and 4.
Tips:
• Quick search interval allows you to set a fixed interval between frames and
browse through the movie using the set value.
• You can also click Invert Selection to select all unmarked segments instead.
6. Click OK.
Tips:
• Click Play Trimmed Video to view the extracted segments.
• To remove any extracted segment from the list, select it in the Media Clip list and
click Remove selected clips.
ULEAD DVD MOVIEFACTORY USER GUIDE 29
or . Set the quick