Ulead DVD MOVIEFACTORY 5 PLUS User Manual page 15

The Audio tab
The Audio tab allows you to add audio to your video.
To add audio:
1. In the Audio tab, click Add Audio to locate the audio file to add. The added
audio files are displayed on the list below Add Audio.
2. To preview and trim an audio file or apply fade-in/out effects, click Set audio
properties . The duration of all audio files in your project is displayed in
Total duration.
Note: Even if the audio is trimmed or edited, the actual audio playback duration
remains the same as the video playback duration. Audio playback will loop if the
video duration is longer.
3. To add a voice annotation to your video, drag the Jog Slider or use the playback
controls or the Jog Wheel to move between frames in the video. Stop when you
reach the point where the annotation will be inserted. Click Record Voice
and test your microphone (adjust the volume as needed), then click Record to
start.
4. To remove a previously recorded annotation, select it from the Recorded voice
list then click Delete
5. Adjust the volume for the original audio track, additional audio file, and recorded
voice annotations respectively. Click Play to preview the result.
6. Click OK.
Options for the Audio tab
• Add Audio Click to locate an audio file to be used as background music for your
video. The added audio files are displayed on the list below it.
• Record Voice Click to record and add voice annotations to your video.
• Mix audio Enter the specific value or move the slider to adjust the volume level
for the Original, Additional, and Voice audio tracks respectively.
• Mute Click to disable a specific audio track.
ULEAD DVD MOVIEFACTORY USER GUIDE 15
.