Burning A Disc From A Disc Image File - Ulead BURN.NOW 1.5 User Manual

7. Specify a file name for the disc image file, and click Save to
create the disc image file.

Burning a disc from a disc image file

If you created a disc image file from a source disc, or if you
previously saved a disc image file for a data, MP3, or audio disc
created in Burn.Now, you can easily burn multiple disc copies using
the image file.
To burn a disc from a disc image file:
1. Insert a blank disc in your disc burner.
2. In the Select a Task dialog box, select Copy Disc.
3. Under Source, select Disc image file then click Browse to
open an image file.
4. Under Destination, choose your burner drive.
5. Click Advanced to see more burning options.
6. Set the Write speed. If there is a disc inserted in the burner
drive, the program will check the write speed of the burner and
the disc, and by default, will choose the highest speed that both
can handle.
7. Specify the number of disc Copies to burn.
8. Select Buffer underrun protection to prevent interruptions in
the flow of data from the hard disk to the burner and ensure a
safe burn.
9. Click OK to start the burning process.
ULEAD BURN.NOW USER GUIDE 43