Ulead BD DISCRECORDER 2.7 User Manual page 10

10 BD DiscRecorder USER GUIDE
Capturing High-Definition video (HDV)
Before capturing your HDV or HD video into BD DiscRecorder, make sure that your
camcorder (or deck) is properly detected by your computer. Also check the
following:
On Sony HDV camcorder:
If you have connected your Sony HDV camcorder before to your computer, check
the Device Manager to see if your camcorder is detected as a DV device or AV/
C tape device. If the camcorder is detected as a DV device, you can capture DV
footage. If your camcorder is detected as an AV/C tape device, you can capture
HDV footage.
DV mode
Note: The Sony HDV camcorder can be detected only under Windows XP Service Pack 2.
To capture video from an HDV camcorder:
1. Connect your HDV camcorder to your computer's IEEE-1394 port using the
IEEE-1394 cable.
2. Turn on your camcorder and switch it to Play mode.
3. If you have a Sony HDV camcorder, make sure it is switched to HDV mode.
4. Click Capture
5. Select the device to capture from Source.
6. Click Advanced Settings and select Capture Options. In the Device Control
dialog box, select HDV 1394 Device Control in Current Device drop-down
list. Click OK.
.
HDV mode