Safety Belts: They're For Everyone - GMC YUKON DENALI 2000 Manual

Table of Contents

Advertisement

Heated Rear Seats
Press the top of the switch to HI or the bottom of the
switch to LO to turn on the heating elements in the
outside rear seat positions. The text HI or LO on the
switch will illuminate to indicate that the heated seat
elements are operating. The switch on the left side
operates the driver's seat and the switch on the right side
operates the passenger's sent. The rear seat outside
passenger's safety belt must be attached before the
heating element in that seat will operate. To turn the
heated seats off, move the switch to the center. For more
information on heated front seats, see "Heated Front
Seats" in the Index.
1-8
The controls for the heated
rear seats are located on the
rear of the center floor
console, below the rear seat
audio controls.

Safety Belts: They're for Everyone

This part of the manual tells you how to use safety belts
properly. It also tells you some things you should not do
with safety belts.
And it explains the air bag system.
CAUTION:
Don't let anyone ride where he or she can't wear
a safety belt properly. If you are in a crash and
you're not wearing a safety belt, your injuries
can be much worse. You can hit things inside the
vehicle or be ejected from it. You can be seriously
injured or killed. In the same crash, you might
not be if you are buckled up. Always fasten your
safety belt, and check that your passengers' belts
are fastened properly too.

Advertisement

Table of Contents
loading

This manual is also suitable for:

2000 yukon denali

Table of Contents