GMC YUKON DENALI 2000 Manual page 18

Folding the Rear Seat
Your vehicle has a 60/40 rear seat. Either side may be
folded down to give you more cargo space.
Before folding, place the latch portion of the center
safety belt in the center armrest. That way, the center
safety belt will be out of the way when the seat is folded
and also will be easily available for passengers to use
when the seat is returned to the passenger position. Also,
make sure that nothing is under or in front of the seat.
When the seat is folded, it will lay flat on the floor.
Then, pull the seat cushion up and fold it forward.
1-6
To fold the seat, pull up on
the strap loop at the rear of
the seat cushion.
Set the head restraints aside for now. You will stow
them in their proper position after you are done folding
the seat.
Pull the seatback forward and fold the seatback down
until it is flat.
Fold the seatback forward
enough to allow removal
of the head restraints. Push
and hold the release buttons
at the bottom of each head
-
restraint height adjust
post and slide the head
restraint out of the
-
height adjust tubes.