Sony PCG-FRV28 User Manual page 106

Selecting a display
When you connect an external display (projector, computer monitor, or TV) to your computer, you can switch the display
between the computer screen (LCD), the external display, or both, using shortcut keys or the Display Properties settings.
To switch displays using the Fn+F7 shortcut keys
1.
Make sure the display cable (not supplied) is connected to the external display and the computer.
2.
If the computer is not on, then press the power button.
If the computer is on, restart it by clicking Start, Turn Off Computer, and Restart.
3. Press the Fn+F7 keys. A small window appears near the taskbar. Press either the Left Arrow
Arrow key to select a display option, or press FN+F7 again, until you get the desired display option.
Select one display at a time before playing a DVD. You cannot use the Fn+F7 function to switch between the LCD
and TV once a DVD is inserted into the optical drive.
To switch the display using the Display Properties settings
Depending on the external display, you may need to connect the display to the computer before you turn the
computer on.
1. Click Start on the Windows
2.
Click Display. The Display Properties window appears.
3.
Click the Settings tab, and then click the Advanced button.
4.
Click to the Displays tab. The Sony Notebook LCD and RADEON IGP Properties window appears.
(Multiple Monitors) and RADEON IGP Properties
taskbar, and then click Control Panel and Appearance and Themes.
®
key or Right
Page 106