|
Home Page
Illustrated Parts Catalog
Removing the Diskette Drive
Electrostatic
Discharge
Service
Consideration
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Heatspreader
Keyboard
Processor
Hard Drives
CD Drive
Battery
Charger
Board
Modem
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette
Drive
Fan Assembly
System
Board
Memory
Module
Maintenance & Service Guide
Presario 1200 Series
Models: 1230 and 1232
|
Notice
|
Preface
|
|
Removal & Replacement Procedures
Pin Assignments
|
Product Description
Battery Pack Operations
|
Troubleshooting
|
Specifications
To remove the
diskette drive,
complete the
following steps:
1.
Prepare the
computer for
disassembly.
2. Remove the
palmrest cover
with touch
3. Remove the
heatspreader.
4. Remove the
keyboard.
5. Remove the
hard
5. Remove the
display panel
assembly.
6. Remove the
Upper CPU
cover.
7. Remove the
screw from the
diskette drive
and lift up the
diskette drive.
Next Step
NOTE:
pad.
drive.
Ensure
the
diskette
drive
eject
lever is
properly
inserted
in the
chassis
slot,
when
replacing
the
diskette
drive.