Zif Connectors - Compaq 1200US - Presario - Celeron 800 MHz Maintenance And Service Manual

Maintenance & Service Guide
| Home Page | Notice
Illustrated Parts Catalog
Pin Assignments
Presario 1200 Series
Models: 1230 and 1232
| Preface | Product Description
| Removal & Replacement Procedures
| Battery Pack Operations

ZIF Connectors

The computer uses a zero insertion force
(ZIF) connector for the keyboard cable to the
system board. To remove a cable from a ZIF
connector, lift both corners of the ZIF
connector and slide simultaneously with
constant light force.
Back to
| Troubleshooting
| Specifications
CAUTION: A ZIF connector and its
attached cable can be easily
damaged. Handle only the connector
slide when removing or replacing a
cable. Never pull or twist on the
cable while it is connected.
CAUTION: When servicing this
computer, ensure that cables are
placed in their proper location during
the reassembly process. Improper
cable placement can damage the
computer.
Cables and Connectors.