Removing The Processor - Compaq 1200US - Presario - Celeron 800 MHz Maintenance And Service Manual

| Home Page
Illustrated Parts Catalog

Removing the Processor

Electrostatic
Discharge
Service
Consideration
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Heatspreader
Keyboard
Processor
Hard Drives
CD Drive
Battery
Charger
Board
Modem
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette
Drive
Fan Assembly
System
Board
Dip Switch
Settings
Memory
Module
Maintenance & Service Guide
Presario 1200 Series
Model: 1245
| Notice | Preface |
| Removal & Replacement Procedures
Pin Assignments |
Product Description
Battery Pack Operations
| Troubleshooting
| Specifications
To remove
the
processor,
complete the
following
steps:
1. Prepare
the computer
for
disassembly.
2. Remove
palmrest
cover with
touch
3. Remove
the
heatspreader.
4. Remove
the keyboard.
5. Insert a
small-blade
screwdriver
into the
bottom slot
opening on
the processor
and push
toward the
display to
release the
processor
from the
chassis slot.
6. Lift the
processor out
of the
processor
chassis slot.
Next Step
pad.