|
Illustrated Parts Catalog
Listed below are some of the considerations that you should keep in mind during the
disassembly and re-assembly of the computer.
Tool and Software Requirements
To service the computer, you need the following:
Compaq screwdriver kit (Spare Part No. 161946-001)
Torx T-9 screwdriver
3/16-inch and 5mm nut drivers (for screwlocks and standoffs)
Small, standard screwdriver
Small, Phillips screwdriver
Diagnostics software
Screws
The screws used in the computer are not interchangeable. If an incorrect screw is used during the
reassembly process it can damage the unit.
Compaq strongly recommends that each screw removed during disassembly be kept with the part
from which it was removed, then returned to the original location.
As each subassembly is removed from the computer, it should be placed away
IMPORTANT:
from the work area to prevent damage.
Return to Removal & Replacement Procedures
Maintenance & Service Guide
Home Page
|
Notice
|
|
Pin Assignments
Service Considerations
Presario 1200 Series
Model: 1245
Preface
|
Product Description
Removal & Replacement Procedures
|
Battery Pack Operations
|
Troubleshooting
|
Specifications