Upgrading Console Switch Firmware - HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual

Wait 60 seconds after powering up before performing any console switch operations.

Upgrading console switch firmware

You can upgrade the console switch firmware by using TFTP or File System.
The interface adapter can be upgraded individually in the Settings tab or simultaneously in the Tools tab.
NOTE:
have not yet applied those changes before starting the upgrade, a warning message prompts
you to confirm the upgrade because the upgrade process requires that the console switch be
rebooted. If you do not apply the changes, they are discarded before upgrading the firmware.
To perform TFTP downloads, TFTP must be enabled.
CAUTION:
up to 10 minutes to complete.
Click Tools.
1.
Click Upgrade Console Switch Firmware. The Upgrade Console Switch Firmware dialog box
2.
appears.
Select TFTP Server or File System.
3.
If you enabled File System, enter the firmware file name, or browse to the location where the
firmware is located.
-or-
If you made changes in the Settings tab of the Manage Console Switch window, but
Do not power down the console switch while it is upgrading. This process can take
Managing KVM console switches 72