Denon AVR 2308CI - AV Receiver Manual page 10

COMMAND PARAMETER
PS TRE UP
TRE DOWN
TRE **
TRE ?
DCO OFF
DCO LOW
DCO MID
DCO HIGH
DCO ?
LFE UP
LFE DOWN
LFE **
LFE ?
EFF **
EFF ?
DEL UP
DEL DOWN
DEL ***
DEL ?
AFD ON
AFD OFF
AFD ?
PS COMMAND : "*" parameter uses two or three ASCII characters. (see page4 J) section)
TREBLE UP/DOWN , direct change to **dB
**:00 to 99 by ASCII , 50=0dB
---AVR-2308 can be operated from -6 to +6(44 to 56)
Return PSTRE Status
D.COMP direct change
Return PSDCO Status
LFE UP/DOWN , direct change to **dB
**:00 to 99 by ASCII , 00=0dB, 10=-10dB
---AVR-2308 can be operated from 0 to -10
Return PSLFE Status
EFFECT LEVEL direct change to **dB
**:00 to 99 by ASCII , 00=0dB, 10=10dB
---AVR-2308 can be operated from 1 to 15
Return PSEFF Status
DELAY UP/DOWN , direct change to ***dB
***:000 to 999 by ASCII , 000=0ms, 300=300ms
---AVR-2308 can be operated from 0 to 300
Return PSDEL Status
AFDM ON/OFF
Return PSAFD Status
function
- 10 -
example
PSTRE UP<CR>
PSTRE DOWN<CR>
PSTRE 50<CR>
PSTRE ?<CR>
PSDCO OFF<CR>
PSDCO LOW<CR>
PSDCO MID<CR>
PSDCO HIGH<CR>
PSDCO ?<CR>
PSLEE UP<CR>
PSLFE DOWN<CR>
PSLFE 10<CR>
PSLFE ? <CR>
PSEFF **<CR>
PSEFF **<CR>
PSEFF ?<CR>
PSDEL UP<CR>
PSDEL DOWN<CR>
PSDEL ***<CR>
PSDEL ?<CR>
PSAFD ON<CR>
PSAFD OFF<CR>
PSAFD ?<CR>