Setting the Configuration Switches
!
Before opening the system unit, save any open files, exit Windows, turn off
the power of the computer and all attached peripherals, and then unplug the
power cord.
1
Remove any add-in cards (see
page 27).
2
Set the switches as needed (see
page 17).
3
Replace any add-in card removed in step 1 (see
Card"
on page 26).
Removing, Installing, and Replacing Components
"Removing an Add-in Card"
"Configuring the System Board"
"Installing an Add-In
29
on
on
MAN008.VSD