Rear View - IBM 8836 - Eserver xSeries 306 Installation Manual

Rear view

The following illustration shows the LEDs on the rear of the server.
Ethernet 1 transmit/receive activity LED: This LED is on the Ethernet connector.
When this LED is lit, it indicates that there is activity between the server and the
network.
Ethernet 1 speed 1 Gbps LED: This LED is on the Ethernet connector. When this
LED is lit, it indicates that the Ethernet network speed is 1 Gbps. When this LED is
off, it indicates that the Ethernet network speed is 10 Mbps or 100 Mbps.
Ethernet 2 speed 1 Gbps LED: This LED is on the Ethernet connector. When this
LED is lit, it indicates that the Ethernet network speed is 1 Gbps. When this LED is
off, it indicates that the Ethernet network speed is 10 Mbps or 100 Mbps.
Ethernet 2 transmit/receive activity LED: This LED is on the Ethernet connector.
When this LED is lit, it indicates that there is activity between the server and the
network.
18
IBM xSeries 306 Type 8836: Installation Guide
Ethernet 1 transmit/receive
activity LED
Ethernet 1 speed
1 Gbps LED
Ethernet 2 speed
1 Gbps LED
Ethernet 2 transmit/receive
activity LED