Configuring Microsoft Fax - Gateway DX442XP User Manual

4
5
6

Configuring Microsoft Fax

information in the
Before you send your first fax, you need to set up your user information. Your fax cover sheets
and fax headers contain this information, some of which is required by law. The Fax Configuration
Wizard opens the first time you try to send a fax.
To configure Microsoft Fax:
1
2
3
4
5
6
24
Chapter 3: Using the Internet and Faxing
Click Fax Services, then click Next.
Click Finish to exit the Windows Components Wizard.
Click Exit to close the Welcome to Microsoft Windows XP dialog box.
-OR-
Click Close to close the Add or Remove Programs dialog box.
Important
The first time you run the Fax Configuration Wizard, you may need to provide
Location Information
Click Start, All Programs, Accessories, Communications, Fax, then click Fax Console. The
Fax Configuration Wizard opens.
On the Welcome to Fax Configuration Wizard screen, click Next. The Sender Information
screen opens.
Type the information about yourself that you want to appear on your fax cover page, then
click Next. The Select Device for Sending or Receiving Faxes screen opens.
Click the arrow to open the Please select the fax device list, then click the modem you
are using to send and receive faxes.
If you want the modem to automatically answer the telephone in order to receive faxes, click
the Enable Receive check box.
Click Next. The Transmitting Subscriber Identification (TSID) screen opens.
Important
Some fax machines cannot use special characters such as hyphens. We
suggest using spaces instead of hyphens in telephone and fax numbers.
and the Phone and Modem Options dialog boxes.