Table of Contents
Advertisement
Notes:
a. Note the orientation of the notches
the microprocessor on the new system board.
b. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be
kept as clean as possible.
8. Make sure that the microprocessor retainer is fully open.
9. Holding the new microprocessor with your fingers, remove the protective cover
contacts on the microprocessor
10. Holding the microprocessor with your fingers, position the microprocessor so that the notches on the
microprocessor are aligned with the tabs in the microprocessor socket.
76
ThinkCentre Hardware Maintenance Manual
1
on the microprocessor. This is important when reinstalling
1
.
2
that protects the gold
Advertisement
Table of Contents
