Safety Instructions; Setting Up Your System; Care During Use - ASROCK VisionX User Manual

Safety instructions

Your system is designed and tested to meet the latest standards of safety for infor-
mation technology equipment. However, to ensure your safety, it is important that
you read the fol lowing safety instructions.

Setting up your system

• Read and follow all instructions in the documentation before you operate your
system.
• Do not use this product near water or a heated source such as a radiator.
• Set up the system on a stable surface.
• Openings on the chassis are for ventilation. Do not block or cover these
openings. Make sure you leave plenty of space around the system for
ventilation. Never insert objects of any kind into the ventilation openings.
• Use this product in environments with ambient temperatures between 0
o
and 40 C.
• If you use an extension cord, make sure that the total ampere rating of the
devices plugged into the extension cord does not exceed its ampere rating.

Care during use

• Do not walk on the power cord or allow anything to rest on it.
• Do not spill water or any other liquids on your system.
• When the system is turned OFF, a small amount of electrical current still flows.
Always unplug all power, modem, and network cables from the power outlets
before cleaning the system.
• If you encounter the following technical problems with the product, unplug the
power cord and contact a qualified service technician or your retailer.
• The power cord or plug is damaged.
• Liquid has been spilled into the system.
• The system does not function properly even if you follow the operating
instructions.
• The system was dropped or the cabinet is damaged.
• The system performance changes.
No disassembly
NOTE:
The warranty does not apply to products (including HDD, ODD, memory
and warranty seal) that have been damaged as a result of attempting to
disassemble/reassemble the system or modifying the hardware
configuration.
o
C
3