Table of Contents
Advertisement
Chapter 3
Installing and Configuring Cisco Secure ACS Solution Engine 4.1
Figure 3-10
Insert the chassis in the rack. See
Step 2
Figure 3-11
Slide the chassis back and forth several times. Fasten with all the screws.
This product relies on the building's installation for short-circuit (overcurrent)
Warning
you use a fuse or circuit breaker no larger than 120 VAC, 15A (U.S./CAN); 240 VAC, 10A (INTERNATIONAL).
Statement 1005
Connecting to the AC Power Source
Warning
This equipment must be grounded. Never defeat the ground conductor or
absence of a suitably installed ground conductor.
or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Connect the AC power receptacle to the AC power source with the provided power cable.
OL-9969-03
Sliding the Chassis Rail Mount Extended Tab
1
Figure
Sliding Chassis onto Rack
3-11.
Contact the appropriate electrical inspection authority
Installation Guide for Cisco Secure ACS Solution Engine 4.1
Connecting to the AC Power Source
protection. Ensure that
operate the equipment in the
3-9
Advertisement
Table of Contents
