Programming Homelink - Dodge 2007 Charger SRT8 Owner's Manual

Programming HomeLink

NOTE: When programming a garage door opener, it is
advised to park outside the garage. It is also recom-
mended that you install a new battery in the hand-held
transmitter of the device being programmed. This will
allow for quicker training and accurate transmission of
the radio-frequency signal.
The Electronic Vehicle Information Center (EVIC) fea-
tures a driver-interactive display, which includes
HomeLink system messages. The EVIC is located in the
instrument cluster below the speedometer.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105
Electronic Vehicle Information Center
1. Press and hold the two outer HomeLink buttons.
Release the buttons only when the EVIC displays "Chan-
nels Cleared" (after 20 seconds); however, do not hold
the buttons for longer than 30 seconds. Do not repeat this
step if programming a second or third hand-held trans-
mitter to the remaining HomeLink buttons.
3