Things You Should Know About Your Uconnect™ System - Dodge 2007 Caliber Owner's Manual

86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Delete UConnect™ Paired Cellular Phones
• Press the 'Phone' button to begin.
• After the Ready prompt and the following beep, say
Setup Phone Pairing.
• At the next prompt, say Delete and follow the
prompts.
• You can also press the Voice Recognition' button
anytime while the list is being played and then choose
the phone you wish to delete.
Things You Should Know About Your UConnect™
System
Voice Training
For users experiencing difficulty with the system recog-
nizing their voice commands or numbers, the UConnect
system Voice Training feature may be used. To enter this
training mode, follow one of the two procedures: From
outside the UConnect mode (e.g. from radio mode),
• Press and hold the 'Voice Recognition' button for 5
seconds until the session begins, or
• Press the 'Voice Recognition' button and say Setup,
Voice Training command.
Repeat the words and phrases when prompted by the
UConnect System. For best results, the Voice Training
session should be completed when the vehicle is parked,
engine running, all windows closed, and the blower fan
switched off.
This procedure may be repeated with a new user. The
system will adapt to the last trained voice only.
To restore the Voice recognition system to factory default
settings, enter the Voice Training session via the above
procedure and follow the prompts.
Voice Recognition (VR)
• Always wait for the beep before speaking.
• Speak normally, without pausing, just as you would
speak to a person sitting approximately eight (8) feet
away from you.
• Make sure that no one other than you is speaking
during a voice recognition period.