Tascam DR-05 Release Notes page 2

6 Use the +/− buttons to select the firmware and
press the Á button to open the following screen.
The current version appears on the left and the
updated version appears on the right.
NOTE
The screen shown is an example. The actual display differs.
7 Press the Á button to start the update.
8 When the update is complete,
appears at the bottom of the screen,
Complete
and then the power turns OFF automatically. Turn
the power ON again.
9 Follow the "Confirmation of firmware version"
instructions above to check that the
is now the most recent version of the
Ver.
firmware.
This completes the procedure for updating this unit.
10 Connect to a computer with USB and delete the
firmware update from the unit's UTILITY folder.
2
TASCAM DR-05
DR-05
Update
System
Release Notes