Dual Automatic Climate Control - GMC ENVOY GTK 2004 Manual

Getting to Know Your Envoy
6

Dual Automatic Climate Control

(if equipped)
Manually select desired airflow
source
• Press and release the MODE button
until the desired source is indicated
on the display. Mode selections
include VENT, BI-LEVEL, FLOOR
and DEFOG/DEFROST.
Manually raise or lower fan speed
• Press the upper or lower portion of
the FAN control
Manually adjust the dual temperature
controls
• Use the knob on the left-hand side of
the climate control panel to adjust the
temperature on the driver side of the
vehicle. Use the right-hand knob to
adjust the temperature on the pas-
senger side of the vehicle as well as
the second row.
• To match and link the passenger-side
temperature to the driver's, press and
hold the AUTO button for three sec-
onds.
button.
Recirculate interior air and prevent
outside air from entering your vehicle
• Press the RECIRCULATE
This feature can be activated while in
the VENT or BI-LEVEL mode, but not in
DEFOG, DEFROST or FLOOR mode.
Clear the windshield and front side
windows of fog or frost more quickly
• Press the FRONT button.
Clear the rear glass of fog or frost
more quickly, and activate the heated
outside rearview mirrors (if equipped)
• Press the REAR button.
Adjust and Memorize the preferred
automatic settings for two drivers
• Press the button with the unlock
symbol on the remote keyless entry
transmitter, or press one of the
memory buttons on the driver's door.
• Push the AUTO button and adjust
the temperature knob to the desired
temperature to set automatic air deliv-
ery mode, fan speed, A/C and recir-
culation functions for the driver.
• Press AUTO again within five
seconds and settings for the front
passenger are displayed and can
be adjusted.
• The new settings are automatically
memorized for the driver as identified
by the Remote Keyless Entry trans-
mitter or by memory button.
See Section 3 of your Owner Manual.
button.