TP-Link TL-WR720N Quick Installation Manual

Quick Installation Guide

150Mbps Wireless N Router
TL-WR720N
MODEL NO.
2
Con guration for Windows with Setup Wizard
If you are using a MAC/Linux or a Windows computer without a CD drive to run the mini CD, please refer to Appendix 1 for configuration.
1
Insert the TP-LINK Resource CD into the CD-ROM drive.
2
Select TL-WR720N and click Easy Setup Assistant.
7106503893

Package Contents

TL-WR720N Power Adapter
Ethernet Cable Resource CD
150Mbps Wireless N Router
MODEL NO. TL-WR740N/TL-WR741ND
QIG
Select your language from the drop-down menu. Click
3
START and the Easy Setup Assistant will guide you step
by step to set up the Router.
After con rming the hardware connection and the status
4
of LEDs, please click NEXT to continue.
1

Hardware Connection

Wall Socket
Wall Socket
Internet
Cable/DSL Modem
4
2
Power o your modem.
1
Connect the WAN port on your Router to the modem's LAN port with an Ethernet cable.
2
Connect your computer to one of the LAN ports labeled 1~2 on the Router with an Ethernet cable.
3
4 Power on the modem and wait for one minute .
5 Plug the provided Power Adapter into the POWER jack on the back of the Router and the other end to a standard electrical wall socket.
After the connectivity is checked successfully, please click
5
NEXT.
Select the WAN connection type your ISP provides and click
6
NEXT. Here we take Dynamic IP for example.
WPS/
RESET POWER WAN 1 2
5
Computer
3
You can rename your wireless network on this page.
7
The default wireless name is TP-LINK_XXXXXX. Click
NEXT to continue.
8 You are recommended to select Most Security
(WPA2-PSK) to secure your wireless network.
(To be continued)
The Router is
pre-encrypted.
The default wireless
password, the same
as the PIN code, is
printed on the label
at the bottom of the
Router.