Table of Contents
Advertisement
Altiris Deployment Solution™ from Symantec User's Guide
3.
Select Automatically perform configuration task after completing this
imaging task to run the configuration task after the imaging task is complete.
4.
Click Next. The Return Codes dialog appears.
5.
(Optional) Set Return Codes. See
6.
Click Finish. The task appears in the Task list for the job. The Mac image is
deployed when you run this task.
Note
The Image is stored locally on the client and the Sysprep settings options are
disabled when you select a Mac image. The Select a computer on the network
feature is not supported when using Mac Imaging. The Automation pre-boot
Environment for Mac Image is Default Automation when deploying Mac images.
This option uses the NetBoot architecture that was previously set up. For more
information, see topics on NetBoot in the Administration Guide.
Distributing a Ghost image
You can distribute a Ghost (.GHO) image using the Distribute Disk Image task.
For more information about Ghost, see the Symantec Ghost Imaging Foundation
documentation.
To distribute a Ghost image
1.
On the Distribute Disk Image dialog, select the Select a disk image file option.
2.
Browse and select a .GHO image.
If you do not want the Deployment Server to validate a selected path, select
Disable image path validation. This is useful if the image is stored locally, or if
you are retrieving the image from a remote server.
3.
To use Sysprep to distribute the image, select Prepared using Sysprep.
4.
From the Operating System drop-down list, select the operating system.
Note
Click Add New. From the Sysprep Settings dialog, select the operating system
information.
5.
From the Product Key drop-down list, select the product key.
6.
Add any additional parameters in the Additional Parameters field.
7.
To restart the computer and push the configuration settings to the imaged
computer, select Automatically perform configuration tasks after completing
this imaging task.
8.
From the Automation pre-boot environment drop-down list, select the required
pre-boot environment to perform the Distribute Disk Image task.
By default, the Default Automation (Auto-select) type is selected.
9.
Click Next.
10. (Optional) Set Return Codes. See
11. Click Finish.
Setting up return codes
on page 193.
Setting up return codes
on page 193.
165
Advertisement
Table of Contents
