TP-Link TL-WN727N User Manual page 35

Step 8. In the prompt page shown below, select Use the Following IP Address, and set the IP
and Subnet mask. After completing setting, click OK.
Note: Please set the IP address in different network segment with the other network
card to avoid conflict.
Step 9. Launch TL-WN727N Wireless Utility, then highlight the Network Name (SSID) beginning
with "PSP" in the "Network" page, and click Connect.
TL-WN727N Wireless Lite-N USB Adapter User Guide
Figure 5-4
Figure 5-5
- 30 -