Radio On/Off - TP-Link TL-WN727N User Manual

Wireless lite-n usb adapter

Hide thumbs Also See for TL-WN727N:

Table of Contents

as Figure 3-10 shown. And then click PIN button to start the wireless connection without doing

any configuration for AP.

Note:

The default PIN code of the AP always can be found in its label or User Guide.

Enter the PIN into my Access Point

Choose the Config Mode as Enrollee and click the PIN button on the screen as Figure 3-11.

Meanwhile, enter the PIN code of the adapter into the configuration utility of the AP. For the

detailed instructions of the AP configuration, please refer to the User Guide of the AP.

Note:

The PIN code of the adapter is displayed on the QSS configuration screen as Figure 3-11 (the

default PIN code for this adapter is 08781949 as Figure 3-11 shown)

3.1.6 Radio On/Off

You can turn on/off the wireless radio by clicking the icon

to red

when the wireless radio is turned off.

TL-WN727N

Wireless Lite-N USB Adapter User Guide

Figure 3-10 QSS - Registrar mode

Figure 3-11 QSS - enrollee mode

- 17 -

of the Utility. The green icon will turn

Table of Contents