Chapter 3. Configuration Guide; For Windows 7 - TP-Link TL-WN723N User Manual

Chapter 3. Configuration Guide

3.1 For Windows 7

TP-LINK Wireless Client Utility (TWCU) is not available for Windows 7. So after the Adapter's
driver has been installed, we have to use Windows WLAN Autoconfig to establish a connection.
Please follow the steps below.
1. Click the icon
available wireless network list. Select the SSID of your Access Point and click Connect.
2. If your wireless network is secured, you will be required to enter the security key as shown in
Figure 3-2. Enter the passphrase, take 1234567890 for example. And then click OK.
TL-WN723N
at the bottom of your screen in your system tray and then you will see the
Figure 3-1
150Mbps Mini Wireless N USB Adapter
8