Cisco AIR-LAP1142N-A-K9 Getting Started Manual page 21

Figure 4 Low Power Mode Warning
Set the power settings and power injector fields, and verify your switch status as shown in
Step 5
Table 3.
To verify switch status, you need to use the switch CLI. See the Cisco IOS software
Note
configuration guide for your switch.
Table 3 System Power Settings
Power Source
Cisco PSE supporting Cisco Intelligent
Power Management feature
Cisco PSE not supporting Cisco
Intelligent Power Management
1
feature
Cisco Aironet Power Injector with a
Cisco PSE supporting Intelligent
Power Management feature
Cisco Aironet Power Injector with a
Cisco PSE not supporting Cisco
Intelligent Power Management
1
feature
Cisco Aironet Power Injector with a
non-Cisco switch
System Power Settings
Power Settings: Power Negotiation
1
selected
Power Injector: Unchecked
Power Settings: Prestandard
Compatibility selected
Power Injector: Unchecked
Power Settings: Power Negotiation
selected
1
Power Injector: Unchecked
Power Settings: Power Negotiation
selected
Power Injector: Checked
MAC address
No configuration requirement
2
Switch Status
power inline auto
power inline auto
power inline never
power inline never
21