Declaration Of Conformity - Cisco AIR-BR350-A-K9 - Aironet 350 Wireless Bridge Hardware Installation Manual

Appendix B Declarations of Conformity and Regulatory Information
Declare under our sole responsibility that the product,
Fulfils the essential requirements of Directive 1999/5/EC.
The following standards were applied on the combined equipment:
EMC
Health & Safety
The following standards were applied separately on the radio module:
EMC
Health & Safety EN60950: 1992+A1+A2+A3+A4
Radio
The combined equipment carries the CE Mark:
Additional to this CE mark, the equipment will have a sub-label
(referring to the radio module):
The conformity assessment procedure referred to in Article 10 and Annex IV of Directive 1999/5/EC has been
followed in association with the notified body listed below:
Date & Place of Issue: 12 August 2002 - Paris
Signature:
OL-1412-01

DECLARATION OF CONFORMITY

with regard to the R&TTE Directive 1999/5/EC
Cisco Systems Inc.
170 West Tasman Drive
San Jose, CA 95134 - USA
AIR-BR350 / 2.4 GHz DS 11 Mbps Ethernet Wireless Bridge
Variants : AIR-BR350-E-K9, AIR-SSB350-E-K9, AIR-BR351, AIR-BR352
Note: This product is IT equipment with a built in 2,4 GHz Spread Spectrum radio
(Immunity + Conducted Emissions)
(Radiated Emissions)
EN 301.489-1: 2000-08; EN 301.489-17: 2000-09
EN 300.328-1 and -2: 2000-7
BelcomLab, Perronstraat 6, B 8400 Oostende
Frank Dewachter - Manager Corporate Compliance EMEA
11, rue Camille Desmoulins - 92782, Issy Les Moulineaux Cedex 9 France
according to EN 45014
EN 301.489-1: 2000-08; EN 301.489-17: 2000-09
EN 55022: 1998 Class B
EN60950: 1992+A1+A2+A3+A4
Be lgium.
Cisco Aironet 350 Series Bridge Hardware Installation Guide
Declaration of Conformity Statements
DofC 112808 rev3
B-7