Cisco AIR-AP352E2R - Aironet 350 - Wireless Access Point Datasheet page 8

Table 1
Cisco Aironet 350 Series Specifications
Part Numbers
Data Rates Supported
Network Standard
Uplink
Frequency Band
Network Architecture Types
Wireless Medium
Media Access Protocol
Modulation
Operating Channels
Non-overlapping Channels
Receive Sensitivity
Delay Spread
Available Transmit Power
Settings
Range (typical @ 100-mW
transmit power setting with
2.2 dBi diversity dipole
antenna)
Compliance
All contents are Copyright © 2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
AIR-AP352E2C, the standard AP
AIR-AP352E2R-A-K9, the rugged AP configured for operation in most of the Americas
AIR-AP352E2R-E-K9, the rugged AP configured for operation in most of Europe
AIR-AP352E2R-J-K9, the rugged AP configured for operation in Japan
AIR-AP352E2R-S-K9, the rugged AP configured for operation in Singapore and
France
For more details on country specific ordering information see the following link:
http://www.cisco.com/go/aironet/compliance
1, 2, 5.5, and 11 Mbps
IEEE 802.11b
Auto-sensing 10/100BaseT Ethernet
2.4 to 2.497 GHz
Infrastructure
Direct Sequence Spread Spectrum (DSSS)
Carrier sense multiple access with collision avoidance (CSMA/CA)
DBPSK @1 Mbps; DQPSK @ 2 Mbps; CCK @ 5.5 and 11 Mbps
North America: 11; ETSI: 13; Japan: 14
Three
1 Mbps: –94 dBm
2 Mbps: –91 dBm
5.5 Mbps: –89 dBm
11 Mbps: –85 dBm
1 Mbps: 500 ns
2 Mbps: 400 ns
5.5 Mbps: 300 ns
11 Mbps: 140 ns
100 mW (20 dBm)
50 mW (17 dBm)
30 mW (15 dBm)
20 mW (13 dBm)
5 mW (7 dBm)
1 mW (0 dBm)
Maximum power setting will vary according to individual country regulations.
Indoor:
130 ft (39.6 m) @ 11 Mbps
350 ft (107 m) @ 1 Mbps
Outdoor:
800 ft (244 m) @ 11 Mbps
2000 ft (610 m) @ 1 Mbps
Operates license free under FCC Part 15 and complies as a Class B device;
complies with DOC regulations; complies with ETS 300.328, FTZ 2100, and MPT
1349 standards; rugged version complies with UL 2043
Cisco Systems, Inc.
Page 8 of 10