Samsung DVD-HD1080P7 User Manual page 16

C
O N N E C T I O N S
Connecting to a TV
- Connecting to your TV using an S-Video cable.
- You will enjoy high quality images. S-Video separates the picture element into black and white(Y)
and color(C) signals to present clearer images than regular video input mode. (Audio signals are
delivered through the audio output.)
1
Using an S-Video cable (not included), connect the
OUT jack on the rear of the DVD player to the
S-VIDEO IN jack of your
2
Using the audio cables, connect the AUDIO (red and white)
OUT jacks on the rear of the DVD player to the AUDIO (red
and white) IN jacks of your
Turn on your DVD player and TV.
3
Set the Video Output to S-Video
(See pages 52 to 54)
You can also use the VIDEO SEL. button to change the
Output mode. (See page 12)
4
Press the input selector button on your
the S-Video signal from the DVD player appears on your TV
screen.
Note
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)
- The number and position of the jacks may vary depending on the TV set.
Please refer to the user's manual of your TV.
- Please do not connect the S-Video and Component Video (Y, Pb, Pr) outputs simultaneously, as they may
interfere and degrade both video outputs quality.
- If you set the HDMI output resolution, S-Video and component output cannot be used.
(S-Video)
S-VIDEO
TV.
TV.
in the Display Setup menu.
TV remote control until
Video
ENG-16
RED
WHITE
S-Video Cable
Audio Cable
(not included)
RED WHITE