Connection; Recommended Connections - Panasonic DMRBW880 Operating Instructions Manual

Connection

Recommended connections

≥Before connection, turn off all equipment and read the appropriate operating instructions.
≥Other TV connections (
When connected to an HDMI compatible unit, you can enjoy high quality, digital video and audio.
≥The HDMI connection supports VIERA Link "HDAVI Control" (
To household mains socket
(AC 220 to 240 V, 50 Hz)
Connect only after all other
connections are complete.
AC mains
lead
(supplied)
4
AC IN
This unit's rear panel
Required setting:
Set "HDMI Video Mode" and "HDMI Audio Output" to "On" (
(The default setting is "On".)
About Freeview|HD
Freeview|HD is available to 75% of New Zealand homes.
®
Visit www.freeviewnz.tv <http://www.freeviewnz.tv/> to check coverage in your area.
A UHF aerial is required to receive Freeview|HD
About HDMI
≥Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover).
≥When outputting 1080p signal, please use HDMI Cables 5.0 meters or less.
≥Recommended Panasonic's HDMI cable part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.
≥ You cannot connect this unit to DVI devices that are incompatible with HDCP.
Depending on the device, images may not display properly or at all when connecting with a DVI/HDMI switching cable. (Audio cannot be output.)
≥ If you are connecting to a TV that is only compatible with 2 channel audio output, audio with 3 channels or more will be down mixed (
as 2 channels, even if connecting with an HDMI cable. (Some discs cannot be down mixed.)
12
VQT2J70
14)
Cooling fan
3
®
.
®
64).
To the aerial
1
Aerial cable
RF IN RF IN
OPTICAL
RF OUT RF OUT
10BASE-T/
100BASE-TX
DIGITAL AUDIO OUT
2
HDMI cable
( below)
VHF/UHF
HDMI IN
TV's rear panel
80, 81).
P P Y
R B
COAXIAL
R - AUDIO- L VIDEO
(PCM/BITSTREAM)
RF coaxial cable
(supplied)
RF IN
COMPONENT
VIDEO OUT
S VIDEO
106) and output