Tuning - Panasonic DMR-E500HS Operating Instructions Manual
Operating instructions
Hide thumbs
Also See for DMR-E500HS:
- Operating instructions manual (84 pages) ,
- Firmware instructions (6 pages)
Table of Contents
Advertisement
Changing the unit's settings
Refer to the control reference on page 60.
Tuning
1
While stopped
Press [FUNCTIONS].
2
Press [3, 4, 2, 1] to select "SETUP"
and press [ENTER].
3
Press [3, 4] to select "Tuning" and
press [1].
SETUP
Manual
Auto-Setup Restart
Tuning
Others
Manual
You can add or delete channels, or change programme positions.
4
Press [3, 4] to select "Manual" and
press [ENTER].
Manual Tuning
Pos Name
Ch
1
ARD
2
ZDF
3
N3
4
HR3
5
BR3
10
6
SELECT
7
8
ENTER
9
RETURN
10
Delete
Move
Add
A
B C
To delete a programme position
Press [3, 4, 2, 1] to select a programme position and press [A].
To add a blank programme position
Press [3, 4, 2, 1] to select a programme position and press [B].
To move a TV station to another programme position
1 Press [3, 4, 2, 1] to select a programme position and press
[C].
2 Press [3, 4, 2, 1] to select the new programme position to
which you want to assign the TV station and press [ENTER].
RQT7758
64
Pos Name
Ch
4
11
2
12
5
13
8
14
15
16
17
18
19
20
∫ To change the tuning settings for individual
programme position
5
Press [3, 4, 2, 1]
to select a
programme position
and press [ENTER].
Press [3, 4] to select an item and press [1].
Pos
To change the programme position in which
the TV stations are assigned
Press [3, 4] or numbered buttons to select the
number of the desired programme position and
press [ENTER].
Name
To enter or change the name of a TV station
Press [3, 4, 2, 1] to enter station name and
press [ENTER].
If the station name needs a blank space, select
the blank between "Z" and "¢".
Channel
To enter newly available TV stations or change
the channel number of an already tuned TV
station
Press [3, 4] or the numbered buttons to enter
the channel number of the desired TV station.
Wait a few moments until the desired TV station
has been tuned.
After the desired TV station is tuned, press
[ENTER].
Fine Tuning
To obtain the best tuning condition
Press [3, 4] to adjust the best tuning condition
and press [ENTER].
≥Press [1] to return to "Auto".
Mono
To select the type of sound to be recorded
Press [3, 4] to select "On" if the stereo sound is
distorted due to inferior reception conditions, or if
you want to record the normal (mono) sound
during a stereo, bilingual or NICAM broadcast,
and press [ENTER].
Pos
1
Manual
Name
ARD
Tuning
Channel
4
Fine Tuning
Auto
Mono
Off
CHANGE
RETURN
RETURN : leave
Advertisement
Table of Contents
