Transferring (Dubbing) All The Still Pictures On A Card-Copy All Pictures - Panasonic DMR-E500HS Operating Instructions Manual

∫ To register on a folder by folder basis
1 Press [3, 4] to select "Picture/Folder" and press [ENTER].
DUBBING
Create dubbing list.
Picture/Folder Picture
Cancel All
Destination Capacity: 4343MB
1
Dubbing Direction
No. Size Name of item
SD CARD > HDD
New item
2
Dubbing Mode
2 Press [3, 4] to select "Folder" and press [ENTER].
3 Press [3, 4] to select "New item" and press [ENTER].
4 Press [3, 4] to select the folder and press [ENTER].
≥To select a multiple number of items together, press [;]
to add the check mark and press [ENTER] (➡ below,
Multiple editing).
≥To show other pages (➡ below)
≥To switch another higher folder (➡ below)
≥To edit the transferring (dubbing) list (·below)
6
Press [3, 4] to select "Set" and
press [ENTER].
The transferring (dubbing) list is registered.
7
Press [3, 4] to select "Start
Dubbing" and press [ENTER].
≥For individual still pictures only
When specifying another folder as the transferring (dubbing)
destination, select "Folder".
Folder New folder
Make a new folder and dub to it?
Press [2, 1] to select "Yes" and press [ENTER] to start
transferring (dubbing).
To stop transferring (dubbing)
Press and hold [RETURN] for 3 seconds.
To return to the previous screen
Press [RETURN].
∫ To select another folder
1 Press [3, 4, 2, 1] to select "Folder" and press [ENTER].
2 Press [3, 4] to select the folder and press [ENTER].
Create List Picture (JPEG)
SD CARD
Folder 103__DVD
0001 0002 0003 0004
≥The still pictures of different folders cannot be registered on the
same list.
≥If there is a multiple number of higher
folders recognizable, you can switch
them using [2, 1]. (Folders whose
higher folders are different cannot be registered on the same list.)
∫ To edit the transferring (dubbing) list
Select the item in step 5 (➡ page 50, right column)
1 Press [SUB MENU].
2 Press [3, 4] to select the operation and press
[ENTER].
§
Multiple editing is possible (➡ below).
To cancel all registered transferring (dubbing) settings and lists
In step 3 (➡ page 50, right column)
1 Press [3, 4] to select "Cancel All" and press [ENTER].
2 Press [2, 1] to select "Yes" and press [ENTER].
≥The settings and lists may be cancelled in the following situations.
–When a title or still picture has been recorded or erased at the
transfer (dubbing) source
–When steps have been taken, for instance, to turn off the unit,
remove the card, open the tray, change the transfer (dubbing)
direction, etc.
To show other pages
Press [3, 4, 2, 1] to select "Previous" or "Next" and press [ENTER].
≥You can also press [:, 9] to show other pages.
Multiple editing
Select with [3, 4, 2, 1] and press [;]. (Repeat.)
Press [ENTER] to register to the list.
≥A check mark appears. Press [;] again to cancel.
\JPEG\DCIM001
001 100__DVD
002 101__DVD
003 102__DVD
004 103__DVD
- - -
\DCIM
\DCIM\100__DVD
001 100__DVD
002 101__DVD
003 102__DVD
004 103__DVD
- - -
\DCIM
\DCIM\100__DVD
001 100__DVD
002 101__DVD
003 102 DVD
Erase All
Add
Erase §
Transferring (dubbing) all the still
pictures on a card—COPY ALL
PICTURES
[SD] or [PC] > [HDD] or [RAM]
Preparation
Press [SD/PC] to select the source drive.
1
While stopped
Press [FUNCTIONS].
2
Press [3, 4, 2, 1] to select "COPY
ALL PICTURES" and press [ENTER].
COPY ALL PICTURES
Copy from
SD CARD
\DCIM
Copy to HDD
\JPEG\DCIM001
Copy all pictures (JPEG) in the card
≥If there is a multiple number of higher folders recognizable,
you can switch them using [2, 1].
3
Press [3, 4] to select "Copy from"
and press [2, 1] to select the drive.
4
Press [3, 4] to select "Copy to" and
press [2, 1] to select the drive.
5
Press [3, 4, 2, 1] to select "Copy"
and press [ENTER].
To stop transferring (dubbing)
Press and hold [RETURN] for 3 seconds.
To return to the previous screen
Press [RETURN].
[Note]
≥When transferring (dubbing) the still pictures on a folder by
folder or card by card basis, files other than the still picture files
inside the folder will also be transferred (dubbed). (This does
not apply to the lower folders contained inside the folders.)
≥If still pictures are already contained inside the transfer
(dubbing) destination folder, the new still pictures are recorded
following the existing still pictures.
≥If the space on the destination drive runs out or the number of
files/folders to be transferred (dubbed) exceeds the maximum
(➡page 32), transferring (dubbing) will stop partway through.
≥When a name has not been input for the transfer (dubbing)
source folder, it is possible that this folder's number will not be
the same on the transfer (dubbing) destination. It is
recommended that you input a folder name before transferring
(dubbing) (➡ page 44).
≥Print number setting (DPOF) is not transferred (dubbed).
≥The sequence in which the still pictures are registered on the
transfer (dubbing) list may not be the same at the transfer
(dubbing) destination.
RQT7758
51