Dixon 36 & 48 Parts & Owner's Manual page 21

Problem
Mower Does Not Move
When Traction Levers
Are Released
Mower Pulls To One Side
Blades Do Not Turn
Uneven Cut
Rough Cut
Dixon Industries, Inc. • Airport Industrial Park • Coffeyville, KS • 67337 • 620-251-2000
TROUBLE SHOOTING
Possible Cause
Transmission is in neutral
Engine to transmission belt loose
Incorrect drive wheel belt adjustment
Drive belts worn or damaged
Drive belt broken or slipping
Tire pressure not the same in both
drive wheels
Blade belt broken or slipping
Excessive build-up underneath
mowing deck
Unequal space configuration on
blades or front casters
Ground speed too fast for
mowing conditions
Blades bent
Tire pressure in wheels not equal
Unequal spacer configuration on blades
or front casters
Blades dull
Engine not running 3600 r.p.m.
Blades installed upside down
Excessive build-up underneath
Solution
Move transmission lever (page 9)
Check and adjust (page 17)
Check and adjust (page 17)
Check and replace if necessary
Replace or adjust (page 17)
Check and adjust (page 15)
Replace or adjust
Check and clean
Check and adjust (page 13)
Reduce travel speed
Check and replace (page 12)
Check and adjust (page15)
Check and adjust (page 13)
Sharpen or replace (page 15)
Move throttle to fast
Remove and replace rightside up
(page 12)
Check and clean mowing deck
21