New I/O Module Pci/Pci-X Slot Information - Compaq ProLiant 8500 Upgrade Manual

New I/O Module PCI/PCI-X Slot Information

The following section describes the new slot keying on the new I/O module.
Also, a description of the supported I/O boards is given.
I/O Board Slot Descriptions
The new I/O module has 11 slots divided into 3 buses. The Primary bus
(slots 7 through 9) is keyed
boards. The Secondary bus (slots 1 through 6) and the Tertiary bus (slots 10
through 11) are keyed
PCI/PCI-X boards. This is a change from the previous I/O module, where the
Secondary bus (slots 1 through 6) supported 64-bit 5V PCI boards.
Figure 8. I/O board slot descriptions
Compaq ProLiant 8500 Servers I/O Module Upgrade Guide 17
for 64-bit 5V PCI boards or 64-bit PCI universal


for 64-bit 3.3V PCI/PCI-X boards or 64-bit universal

1
2