Dell PowerEdge 180AS User Manual page 88

To add a new Remote Console Switch that does not have an assigned IP
address:
1 Select File - New - Remote Console Switch from the Explorer menu in the
Remote Console Switch Software.
-or-
Click the New Remote Console Switch task button. The New Remote
Console Switch wizard appears.
2 Click Next to continue. The Product Type dialog box appears and prompts
you to select the Remote Console Switch vendor and product.
Figure 4-4. Product Type Dialog Box
3 Select a Vendor. For each vendor, the supported product names appear in
the Product list. Select a product.
If the Remote Console Switch model you wish to add is not available in
the Product list, select Other. Once this switch is discovered, it will be
available in the Product list the next time you add a Remote Console
Switch.
4 Click Next.
5 You are prompted to indicate if the Remote Console Switch has an
assigned IP address. Click No and then click Next.
71
Remote Console Switch Software Basic Operations