Compaq ProLiant 800 User Manual page 195

Table B-6: Administration Error Messages
Error Message
Please set at least the Primary
NTP server before enabling NTP.
<IP address> is already set as
secondary NTP server.
<IP address> is already set as
primary NTP server.
Primary NTP server is already
cleared.
The secondary NTP server is
already cleared.
Please set the primary NTP
server first.
Invalid IP address supplied. IP
address should be in
###.###.###.### or
###.###.###.###/## format
where ### is between 0 and 255
and ## is between 0 and 32.
Invalid e-mail address supplied.
Address should be in
user@domain.tld format.
E-mail address is too long.
Length must be less than 65
characters.
HP ProLiant BL e-Class Integrated Administrator User Guide
continued
Cause
Attempting to enable the NTP
server before enabling the
primary NTP server set.
Attempting to set the primary
NTP server to <IP address>
when the <IP address> is
already set as secondary.
Attempting to set the primary
NTP server to <IP address>
when the <IP address> is
already set as secondary.
Attempting to clear the
primary NTP server that has
previously been cleared or
never set.
Attempting to clear the
secondary NTP server that
has previously been cleared
or never set.
Attempting to set the
secondary NTP server without
first setting the primary NTP
server.
Attempting to set an IP
address that is not in the
correct format.
Attempting to enter an e-mail
address that is not in the
correct format.
Attempting to enter an e-mail
address containing more than
64 characters.
Error Messages
Valid Input
N/A
N/A
N/A
N/A
N/A
N/A
###.###.###.### where ###
is between 0 and 255 and ##
is between 0 and 32.
E-mail addresses formatted
"user@domain.tld" and
containing a maximum of 64
characters.
E-mail addresses formatted
"user@domain.tld" and
containing a maximum of 64
characters.
B-7