Windows Server 2003 Systems Only Option 2: Using Nvrboot - HP Integrity BL890c - i2 Server Software Manual

5. To confirm that the entries were added correctly, run the bootcfg command again:
C:\>bootcfg
The new boot configuration appears:
Boot Options
------------
Timeout: 20
Default:
\Device\HarddiskDmVolumes\PhysicalDmVolumes\BlockVolume1\WINDOWS
CurrentBootEntryID: 1
Boot Entries
------------
Boot entry ID: 1
OS Friendly Name: Windows Server 2003, Enterprise
OsLoadOptions: /redirect
BootFilePath:
\Device\HarddiskVolume1\EFI\Microsoft\WINNT50\ia64ldr.efiOsFilePath:
\Device\HarddiskDmVolumes\PhysicalDmVolumes\BlockVolume1\WINDOWS
Boot entry ID: 2
OS Friendly Name: Internal Bootable DVD
Boot entry ID: 3
OS Friendly Name: EFI Shell [Built-in]
Boot entry ID: 4
OS Friendly Name: Windows Server 2003, Enterprise with Debugging Enabled
OsLoadOptions: /redirect /debug /baudrate=115200
BootFilePath:
\Device\HarddiskVolume1\EFI\Microsoft\WINNT50\ia64ldr.efi
OsFilePath:
\Device\HarddiskDmVolumes\PhysicalDmVolumes\BlockVolume1\WINDOWS
Boot entry ID 4 now shows the debug and baud rate switches. As mentioned previously, a
COM port entry is not required for HP Integrity servers.
Windows Server 2003 Systems Only
To edit boot options using the Nvrboot tool, complete the following steps:
1. From the EFI shell, navigate to the MSUTIL directory and execute the NVRBOOT.EFI
command, as shown here:
fs1:\> dir
Directory of: fs1:\
03/25/03 05:00a 841,216
06/25/03 11:14a <DIR> 1,024 EFI
06/25/03 11:14a <DIR> 1,024 MSUtil
2 File(s) 841,343 bytes
2 Dir(s)
fs1:\> cd msutil
fs1:\MSUtil> nvrboot
2. Select M(Modify) to modify the operating system boot loader.
Option 2: Using Nvrboot
SETUPLDR.EFI
Setting up and connecting to the target machine 19