Panasonic GPUS932CU - 3CCD COLOR CAMERA CCU Operating Instructions Manual page 27

Symptom
Blurred screen
Plural edges visible
"AWC OK" not displayed
Black bars at right and left of
image
Vertically longer image
No sound from monitor
Cause/solution
• Is the lens aperture appropriately adjusted?
Check whether the aperture is appropriately adjusted.
Use lenses with recommended F number or higher and
3CCD-specific lenses.
• Try to change the setting of "DTL MODE".
• Try to change the monitor cable.
• When the screen is too bright, narrow the lens aperture or
set "ELC" to "ON".
• This phenomenon depends on the specifications of the
monitor.
Select the wide and full screen display at the monitor side.
• This unit provides outputs on the assumption that the screen
is 16:9.
Select the wide screen display at the monitor side.
• The monitor is not applicable to sound output.
Reference
pages
14
20
—
14, 18
—
—
—
27