Panasonic GPUS932CU - 3CCD COLOR CAMERA CCU Operating Instructions Manual page 11

<Rear>
GP-US932CU, GP-US932CUE
!3
GP-US932CUS, GP-US932CUSE
!3 HDMI output connector [HDMI] (* only for GP-
US932CU, GP-US932CUE)
This connector is used when an HDMI-ready monitor is
connected.
!4 Video output connector [VIDEO]
This connector provides composite video signals (1.0
V[P-P], 75 ohms).
!5 Synchronizing signal output/input connector [SYNC]
When an external device is synchronized, set the syn-
chronizing signal output/input selection switch !6 to "IN"
to provide the synchronizing signal input.
When the synchronizing signal output/input selection
switch !6 is set to "OUT", the connector provides the
synchronizing signal output conformable to the video
format of this system.
Important:
• The video format shall be the same among the syn-
chronized devices.
!6 Synchronizing signal output/input selection switch
[OUT/IN]
This switch toggles synchronizing signals between out-
put and input.
When the synchronizing signal output is selected, set
this switch to "OUT". When the synchronizing signal
input is selected, set this switch to "IN".
!7 Function setup switches
These switches select a video format for RGB/YPbPr
!4
V I D E O
R G B / Y P b P r S – V I D E O
@1 @0
!4
1 S D I 2 V I D E O
R G B / Y P b P r S – V I D E O
@2 @1 @0
!5
S Y N C O U T O FF O N
ON
1 S D H D
2 I N TE R. PRO G R E .
1 2 3 4
3 N OT U SE N OT U SE
I N
4 R S–2 3 2C FRON T S W
R S – 2 3 2 C D C 1 2 V I N
!9 !8
!5
S Y N C
O U T OFF ON
ON
1 SD HD
2 INTER. PROGRE.
1 2 3 4
3 NOT USE NOT USE
I N
4 RS–232C FRONT SW
R S – 2 3 2 C D C 1 2 V I N
!9 !8
output connector, SDI output connector, and HDMI out-
put connector.
Switch
1 SD (SD signal output)
INTER.
2
(Interlace output)
3 NOT USE (Not used)
RS-232C
4
(RS-232C control)
Switch
Video
format
1
1 080i ON
720p ON
480p (576p*) OFF
480i (576i*) OFF
X: No output is provided.
* The value is for GP-US932CUE/GP-US932CUSE.
Note:
• When the RS-232C port is used, set Switch 4 to
"OFF" after turning off the power.
When Switch 4 is set to "OFF", button operations on
the front face are disabled.
!6
!7
!6
!7
OFF ON
HD (HD signal output)
PROGRE.
(Progressive output)
NOT USE (Not used)
FRONT SW
(Button operation
via front face)
RGB/YPb SDI
Pr output output
2
b b
OFF
b b
ON
b
ON X
b b
OFF
HDMI
output
b
b
b
X
11