Advertisement
Select the region that you are
located in and click Next.
Select the numer of satellites that
you are using. In most situations
there will only be 1 satellite posi-
tion, as your satellite dish will
only have 1 LNB.
Select the satellite that your dish
is pointing to from the satellite
list. In the United Kingdom the 2
most common satellite positions
are:
Astra 2A, 2B, 2D (E28)
Astra 1C, 1E, 1F, 1G, 1H, 2C (E19)
For a SKY satellite dish position
select the Astra 2A, 2B, 2D
(E28) and select Next.
Click on Autoscan for TV
Channels Now to start searching
for TV channels. During the chan-
nel scan the TV pictures will
briefly appear.
Once the channel scan is finished
click on Complete.
Electronic Program Guide
The EPG shows you what's on TV
for up to 2 weeks in advance.
You can use the EPG to shedule
recordings while you are not sit-
ting at the PC.
Click on more information about
EPG.
There are 2 options for recieving
the EPG data:
Using a pay service epgData.com
Using a free service NexTView
Select the NexTView option and
click Next.
Select the folder on your comput-
er where the TV recordings will
be stored.
Page 5
You can search for FM Radio sta-
tions.
When the scanning is finished
click on Complete.
Select the folder on your comput-
er where the FM Radio recordings
will be stored.
You can search for music that is
already stored on your computer
which will add it to a play list.
When the searching is finished
click on Complete.
The setup wizard is now com-
plete, click Next to finish.
N
ote: CyberLink PowerCinema is a function-rich Media center
software. You can use it for the playing of music, video,
DVD's and TV shows. Please refer the user manual, which
you find on the CD-ROM in electronic form.
Page 6
8. Installing the Remote Control software
The remote control software is installed automatically during the
installation of the WinTV applications.
You will see the WinTV Remote icon in the Device Tray. The installa-
tion will add a shortcut to IR.EXE to the Startup group, so that IR.EXE
is loaded every time after Windows has booted.
If you need to restart the remote control, select Restart IR from the
Start \ All Program Files \ WinTV directory.
Please ensure the following before trying to use this option:
1. Infrared Remote control - Has batteries inserted
2. Infrared-Receiver, is fully connected to the IR socket of the WinTV-Card
3. Infrared software is started - The IR icon is on the start bar
To start the PowerCinema press the GO button. Use the scroll up and
down button to select PowerCinema and press OK to select.
Button of the Remote control
Button
Function
Go:
Open PowerCinema
Power:
Close PowerCinema
TV:
Display TV Menu
Videos:
Display Video Menu
Music:
Display Music Menu
Pictures:
Display Pictures Menu
Guide:
Display EPG program guide
(If configured)
Radio:
Display Radio menu
OK:
Confirm selection
Back/Exit: Exit the Menu
Menu:
No function
Vol:
Volume up/down
Prev. Ch:
Select the previous channel
Mute:
Sound on/off
Ch:
Select the next channel
REC:
Start a recording
Stop:
Stop a recording;
Exit pause mode
<<:
Rewind
Play:
Start playing
>>:
Forward
Pause:
Start Pause-Mode (Timeshift)
Skip:
Skip ahead (x2/x 4/x8)
0-9:
Channel number
text (*):
Display teletext pages
Sub/CC:
Display sub-titles (If available)
Color Keys:These keys related to the options available on the teletext
page that you have selected.
Page 7
9. Troubleshooting
To uninstall the Driver and Software
To uninstall the software simply run the hcwclear.exe off
theHauppauge installation CD-ROM and select the last 1 option and
the entry "search all INF files etc". If you now select "OK" a black
screen will briefly appear and once it has disappeared the software
will be removed. If you now re-start the computer you will be at Step
5 on page 2 of this document and can now re-install the software.
"Error code 10" during installation
This is caused by a failure to load the WinTV-HVR-4000 drivers.
Uninstall the software (as above) and then follow the instructions from
page 3. If this still gives you an error message move the WinTV-HVR-
4000 to a different PCI slot and re-install the drivers again.
Only some channels are found during DVB-T channel scan
Ensure that your antenna is capable of receiving Digital terrestrial
transmission (Most rooftop/loft antenna under 8 years old may work).
You can enter your postcode at this website address:
www.dtg.org.uk/retailer/coverage.html as this will show you what
services are available in your area.
You can then enter your postcode at this website:
www.bbc.co.uk/reception/transmitters/today.shtml to see if there is
any engineering work being carried out on your transmitter as this
could affect the reception of some channels.
FCC Statement
Radio Interference Statement:
The WinTV boards have been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment gener-
ates, uses, and can radiate radio frequency energy and cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of
the following measures:
●
reorient or relocate the receiving antenna.
●
increase the separation between the equipment and receiver.
●
connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
●
consult the dealer or an experienced radio/TV technician for help.
FCC ID: H90WINTV
CAUTION: Changes or modifications not expressly approved by the
party responsible for compliance to the FCC Rules could void the
user's authority to operate the equipment.
CE Statement: This equipment has been tested and complies with EN
55013, EN 55020 and IEC 801-3 part 3 standards.
Waste Electrical and Electronic Equipment
(WEEE)
The device may not be disposed of with household rubbish. This
appliance is labeled in accordance with European Directive
2002/96/EG concerning used electrical and electronic appliances
(Waste Electrical and Electronic Equipment - WEEE). The guideline
determines the framework for the return and recycling of used appli-
ances as applicable throughout the EU. To return your used device,
please use the return and collection systems available to you.
Page 8
Advertisement
